IP POWER Rapid Amp Charger / Jump Starter | Compatible with Milwaukee 18V Li-ion Battery
IMPORTANT! Use only a 5.0Ah M18 battery. This delivers a 50-amp rapid charge in one minute and up to 350 boost cranking amps to start your engine.
Options:
- Option 1: Jump Starter in Brown Box
- Option 2: Case Kit, which includes the jump starter and an 18V 5Ah Li-Ion Drill Pack Battery
Output: DC12V 2A/USB5V 2.1A/LED 200lm
Jump Starter Dimensions (L x W x H): 3" x 3.75" x 2"
Brown Box Dimensions (L x W x H): 7" x 5" x 4.5"
Case Dimensions ( L x W x H): 7.5" x 6" x 3.5"
IMPORTANT! Rapid Amp Jump Charger Instructions:
- Connect the red clamp to the positive (+) battery terminal (the one with the red cable).
- Connect the black clamp to the negative (-) battery terminal (the one with the black cable).
- Slide your M18 cordless tool battery onto the Rapid Amp Jump Charger.
- Allow the Rapid Amp Jump Charger to charge your vehicle battery for about 1 minute, then attempt to start your vehicle.
- After the vehicle starts:
-
- Remove the cordless battery from the Rapid Amp Jump Charger.
- Disconnect the black clamp (negative) from your vehicle battery.
- Disconnect the red clamp (positive) last.
IMPORTANT! Automotive safety guidelines:
-
Do not jumpstart unsafe batteries. If your battery smells like rotten eggs or has been sitting completely dead for several days, call a service technician instead of attempting to jumpstart.
- The Rapid Amp Jump Charger is designed for personal vehicles, motorcycles, small farm equipment, riding mowers, RVs, and boats- all equipment that normally starts with an ignition key.
- The Rapid Amp Jump Charger is not intended for extended or repeated cranking.
- For large diesel trucks, tractors, or heavy equipment:
-
- Use two Rapid Amp Jump Chargers at the same time (one per vehicle battery)
- Each must be powered by a 5.0Ah M18 battery.
- Allow charging for 1-2 minutes before starting the engine.
